Rail Users Ireland Forum

Go Back   Rail Users Ireland Forum > Irish Rail Customer Service Issues > Commuter Services
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Thread Tools Search this Thread Display Modes
Unread 31-12-2005, 23:37   #21
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

It was mean't to go to Mullingar, its Saturday it only goes to Mullingar, its quite clear in the timetable0

There has been ongoing issues since IE haven't updated the software on the 29000 fleet so the 17:33 ex Bray has strange destinations in front.

Driver in this case failed to follow the defined protocol to modify the on train information it specifically states what to do its printed on a notice on the bulkhead on the left cab wall.

Complete balls up here inexcusable it would have taken 5 seconds to confirm the details in the timetable, its inconceivable that even the most lazy staff should be able to handle this, its impossible to go wrong but this is IE they do the impossible
Mark Gleeson is offline   Reply With Quote
Unread 31-12-2005, 23:46   #22
ThomasJ
Member
 
ThomasJ's Avatar
 
Join Date: Dec 2005
Location: Clonsilla
Posts: 2,812
Default

Just to add one more in. On this afternoons 12.47 ex clonsilla to pearse the visual stated that it was going to pearse as did the audio but when it got to connolly it stated "The next station is Dublin Connolly, this is the final stop on this service" yet the visual stated pearse station. A few bewildered passengers asked "i thought this was going to pearse?" Anyway the train got into connolly platform 6 and then the announcement "the next station is tara street" and the train went on"
ThomasJ is offline   Reply With Quote
Unread 31-12-2005, 23:51   #23
ThomasJ
Member
 
ThomasJ's Avatar
 
Join Date: Dec 2005
Location: Clonsilla
Posts: 2,812
Default

Quote:
Originally Posted by Mark Gleeson
It was mean't to go to Mullingar, its Saturday it only goes to Mullingar, its quite clear in the timetable0

There has been ongoing issues since IE haven't updated the software on the 29000 fleet so the 17:33 ex Bray has strange destinations in front.

Driver in this case failed to follow the defined protocol to modify the on train information it specifically states what to do its printed on a notice on the bulkhead on the left cab wall.

Complete balls up here inexcusable it would have taken 5 seconds to confirm the details in the timetable, its inconceivable that even the most lazy staff should be able to handle this, its impossible to go wrong but this is IE they do the impossible
Just wondering how come the platform audio announcement didn't follow the real time information? The audio announcement stated Longford. Do staff manually play this announcement?

Last edited by ThomasJ : 31-12-2005 at 23:55.
ThomasJ is offline   Reply With Quote
Unread 31-12-2005, 23:58   #24
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

"The train approaching platform x" is automatic but staff can make announcements at local level they even have a radio mic for this. The automated stuff is generally spot on since its driven by the computer in the signalling system so it knows where everything is going, if it says you are going to Bray you are going to Bray
Mark Gleeson is offline   Reply With Quote
Unread 01-01-2006, 00:06   #25
ThomasJ
Member
 
ThomasJ's Avatar
 
Join Date: Dec 2005
Location: Clonsilla
Posts: 2,812
Default

Thanks for that he says with a glass of champaigne in his hand as he sits at home with a throat infection tonight! Happy 2006 and hopefully many more successes to come!
ThomasJ is offline   Reply With Quote
Unread 02-01-2006, 22:23   #26
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

Sunday 1-1-2006

19:10 Bray Howth
No destination on rear

19:45 Bray Howth
Wrong destination on rear showing Bray instead of Howth
Mark Gleeson is offline   Reply With Quote
Unread 03-01-2006, 18:47   #27
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

Tuesday 3-1-2006

17:25 Howth Bray
No PIS. no displays, no maps, no announcements
8622/21/24/23

17:15 Bray Howth
No external displays working and the wrong destination shown in rear, showing Bray instead of Howth.

17:45 Bray Howth
No destination shown in rear
Mark Gleeson is offline   Reply With Quote
Unread 04-01-2006, 10:36   #28
Kildare Commuter
New to the board
 
Join Date: Dec 2005
Posts: 29
Default

The 29000's on the Kildare trains currently don't have the destinations correct. Dublin Pearse (I wish) is the most regularly used.

Is this just a software upgrade? Also, should these not have been entered when these units came into service?
Kildare Commuter is offline   Reply With Quote
Unread 04-01-2006, 10:44   #29
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

Its a simple software change not even an upgrade its needs the timetable inputted for the Kildare line. IE have known about the use of 29000 on the Kildare line since late October so no excuses

We have a man with camera eager to catch this on the ground

Once again IE show they have no clue
Mark Gleeson is offline   Reply With Quote
Unread 04-01-2006, 12:36   #30
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

Wednesday 4-1-2006

10:38 Malahide Bray
Showing Malahide as the destination in rear coach (8602) instead of Bray

10:59 Bray Howth
No destination shown on rear coach (8405)
Mark Gleeson is offline   Reply With Quote
Unread 05-01-2006, 09:35   #31
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

Thursday 5-1-2006

8:05 Greystones Howth
No announcements made
Displays only worked after Booterstown
This train did not have CCTV but was happy to keep saying it did
No destination shown in rear

8602/01+8204/8404
Mark Gleeson is offline   Reply With Quote
Unread 06-01-2006, 09:59   #32
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

Thursday 5-6-2006

18:45 Bray Malahide
No PIS, No announcements, No map
Showing Bray as destination on rear coach instead of Malahide

21:48 Bray Malahide
Not showing destination on rear*
8608/7 + 8201/8401 *

22:30 Pearse Maynooth
External displays lit up for about 3 seconds and died
unit 29x08

21:59 Bray Howth
Showing Bray as destination on rear coach instead of Howth

Friday 6-6-2006

8:05 Greystones Howth
No PIS, No announcements
Mark Gleeson is offline   Reply With Quote
Unread 06-01-2006, 12:19   #33
MrX
Really Regular Poster
 
Join Date: Dec 2005
Posts: 585
Default

Northbound DART from Pearse around 6:30pm 5th January 2006.

Original 1980s DART. No announcements (as they're not installed) but the train had no maps on board. A number of tourists were asking where Clontarf Road was and how many stops it would be.

There was absolutely no sign of a map anywhere on the train.

Also, could IE perhaps light the station platform signs? They cannot be easily read from a train. Also, a bigger font could help too!
MrX is offline   Reply With Quote
Unread 08-01-2006, 15:38   #34
Mark Hennessy
Membership Officer
 
Mark Hennessy's Avatar
 
Join Date: Dec 2005
Location: Maynooth
Posts: 1,116
Default

06/01/2006

17:55 Maynooth - Pearse

No announcements on the train. 2800 class.

07/01/2006

17:07 Maynooth - Pearse

Train was ready to leave on time but was inexplicably held at the station.
10 mins later two clapped out loco's hauling loads of logs passed by our train.
We then proceeded slowly behind this log train and were twice delayed for long periods at the level crossing at Intel and the level crossing at Coolmine.
My 18 min trip to Coolmine took 40 mins.

No announcements on the train and no apologies for the delay either
Mark Hennessy is offline   Reply With Quote
Unread 09-01-2006, 11:27   #35
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

Monday 9-1-2006

8.05 Greystones Howth
Rear destination was showing Malahide work that one out, train seemed to be almost devoid of maps, I swear they are now collector items after Howth Junction got renamed

17:15 Bray Malahide
Showing Out of Service as the destination on rear

17:15 Howth Greystones
Displays working but the announcements only stated destination is Greystones no next station announcements. Half the maps in my coach where not working

19:16 Malahide Bray
Showing Malahide as the destination on rear instead of Bray

20:30 Bray Howth
Showing Bray as the destination on rear instead of Howth

Last edited by Mark Gleeson : 10-01-2006 at 00:16.
Mark Gleeson is offline   Reply With Quote
Unread 09-01-2006, 23:48   #36
ThomasJ
Member
 
ThomasJ's Avatar
 
Join Date: Dec 2005
Location: Clonsilla
Posts: 2,812
Default

Points failure at Clonsilla this morning.

The 8:32am ex clonsilla to pearse departed at approx 9:15am the same time as the delayed 8:32am to maynooth. Packed train it was stuck at castleknock for a couple of minutes trying to close the doors. after constantly asking people to move back the driver announced there would be a door test. I don't think the driver knew that he said over the intercom f**cking hell as he was driving off.

got into connolly at 9.45am. to the annoucement "we'd like to passengers arriving at platform 6 for the delays caused this morning. this was due to a points failure at clonsilla". the announcements at clonsilla were good but apparently people were complaining on the train that there were no announcements at certain stations.

also noticed that there was no notice on this on the p.i.s at drumcondra or connolly, yet notices have been up to say that dart's were delayed by 10-15 minutes.
ThomasJ is offline   Reply With Quote
Unread 10-01-2006, 00:34   #37
MrX
Really Regular Poster
 
Join Date: Dec 2005
Posts: 585
Default

18:00 at Pearse heading to Bray
The system had stuck at Bayside.
Map was displaying bayside as the current stop .. howth junction as next stop.
Scrolling displays doing the same.

No audio announcements at all.

18:44 at Sydney Parade heading northbound.

Displays saying this train is for bray - stuck in Irish only.
A single announcement en route "This Train is for Bray"

Also, I have noticed a LOT of Luas trams at St. Stephen's Green are displaying "Not in Service" before they depart for Sandyford.

and... the outbound display at Beechwood seems to be out of order for well over a week.

Last edited by MrX : 10-01-2006 at 00:36.
MrX is offline   Reply With Quote
Unread 10-01-2006, 15:14   #38
philip
Member
 
Join Date: Dec 2005
Posts: 632
Default 10/01/06 14.22 Connolly-Maynooth

No LED displays AT ALL working on this train. None inside, none outside. Barely audible PA system in my car (29304). Don't know if the whole train had this problem. Very poor IE!
philip is offline   Reply With Quote
Unread 10-01-2006, 23:09   #39
Mark Gleeson
Technical Officer
 
Mark Gleeson's Avatar
 
Join Date: Dec 2005
Location: Coach C, Seat 33
Posts: 12,669
Default

Tuesday 10-1-2006

17:15 Bray Malahide
Showing 'Out of Service' on rear

17:45 Bray Howth
No destination on rear

17:25 Howth Bray
The now classic the next station in <silence> Sidney Parade is never announced
Mark Gleeson is offline   Reply With Quote
Unread 11-01-2006, 12:20   #40
MrX
Really Regular Poster
 
Join Date: Dec 2005
Posts: 585
Default

If it was an infrequent odd software hickup, you could laugh it off. This is beyond ridiculous. I would reckon that over 75% of the DARTs with PIS fitted have not had it working correctly.

Are IE techies not at least embarassed? I would be if I were responsible for such a fiasco of a system.

If the announcement system's providing misinformation the driver *should* notice and try and remedy the situation / stop the announcements and do them manually.

I think perhaps the best sollution would be to legally require an announcement at every stop. If the train's incapable of doing them - the driver will have to make them manually.

Also, the new platform signs are simply too small to see out of the windows of a train and they're positioned at the wrong height too.

I had to stick my head out the door of a DART recently to see where I was. I am from Dublin but had no clue where the train was. There were no announcements, no signs, no maps... it's like riding a ghost train... eery and quiet! If you were blind/had poor vision you'd be very lost!
MrX is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:28.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.