Possible safety hazard @ Castleknocok (Blanchardstown)

sean · 11-03-2006, 22:13

Was up in Blanchardstown about a week ago, and some sleepers on the Inbound line looked to be in very bad condition.

Firstly, single colour smooth surface usually associated with concrete had been eroded in parts to show the stoney mix in the centre.

Secondly, the date-stamps which are supposed to show the month and year of relay were worn down and no longer visible.

Finally, and this is most worrying what lead me to make this report, one sleeper seemed to have very significant erosion underneath the sleeper chair.

I've uploaded an image. Please excuse the large size.

Mark Gleeson · 11-03-2006, 22:31

No worries here

Sleepers are still intact and holding guage.
Concrete reinforcements not showing
The date stamps location depends on the batch
Ballast condition is good with no signs of decay
Failure of a single or indeed 2 sleepers in a row is not a safety risk

sean · 11-03-2006, 22:37

The date stamp should show JUL 97. Other sleepers in the area had the stamps in order, around there the stamp is on the side nearest the platform.

Probably not a hazard just yet though it looks liek a potential problem for the future..

philip · 13-03-2006, 00:01

Many sleepers in Clonsilla have cracks in them. I think it's odd for 9 year old sleepers to look so sh!te. What the hell can do that stuff sean has shown to concrete? It has to be from contact with something I'd imagine. If the sleeper is disintegrating just from use then there are issues to be resolved.

sean · 13-03-2006, 02:16

Quote:

Originally Posted by philip

Many sleepers in Clonsilla have cracks in them. I think it's odd for 9 year old sleepers to look so sh!te. What the hell can do that stuff sean has shown to concrete? It has to be from contact with something I'd imagine. If the sleeper is disintegrating just from use then there are issues to be resolved.

Yikes! That's not good at all.

Thing about cracks is, when railfall gets into those during cold weather, when it ices you get freeze-thaw action

This load of erosion probably arises from IRs policy of using razor-thin sleepers on a ridiculously wide spacing.

11-03-2006, 22:13	#1
sean Member Join Date: Dec 2005 Location: Dublin Posts: 707	Possible safety hazard @ Castleknocok (Blanchardstown) Was up in Blanchardstown about a week ago, and some sleepers on the Inbound line looked to be in very bad condition. Firstly, single colour smooth surface usually associated with concrete had been eroded in parts to show the stoney mix in the centre. Secondly, the date-stamps which are supposed to show the month and year of relay were worn down and no longer visible. Finally, and this is most worrying what lead me to make this report, one sleeper seemed to have very significant erosion underneath the sleeper chair. I've uploaded an image. Please excuse the large size.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-03-2006, 22:31	#2
Mark Gleeson Technical Officer Join Date: Dec 2005 Location: Coach C, Seat 33 Posts: 12,669	No worries here Sleepers are still intact and holding guage. Concrete reinforcements not showing The date stamps location depends on the batch Ballast condition is good with no signs of decay Failure of a single or indeed 2 sleepers in a row is not a safety risk

11-03-2006, 22:37	#3
sean Member Join Date: Dec 2005 Location: Dublin Posts: 707	The date stamp should show JUL 97. Other sleepers in the area had the stamps in order, around there the stamp is on the side nearest the platform. Probably not a hazard just yet though it looks liek a potential problem for the future..

13-03-2006, 00:01	#4
philip Member Join Date: Dec 2005 Posts: 632	Many sleepers in Clonsilla have cracks in them. I think it's odd for 9 year old sleepers to look so sh!te. What the hell can do that stuff sean has shown to concrete? It has to be from contact with something I'd imagine. If the sleeper is disintegrating just from use then there are issues to be resolved.